Geofence

A geofence time clock that knows which job site the hours belong to

Every job site in BuildMore has an address on the map and a fence around it. When a worker clocks in, the punch is matched to the job site and lands on that job. A punch outside the fence is still recorded, because the hours were worked, and it is flagged so the office can look at it.

No card to start. Cancel from the panel in one click.

Job site

24 Rock Ridge Ave

Inside the fence
Job
Kitchen remodel · #1042
Client
Harper residence
Fence radius
150 m
Clock in
7:02 AM · Luis M.
Clock in
7:15 AM · 0.4 mi away
Outside the fence: recorded and flagged, never thrown away.

How the fence works

The site on the map

Type the address and the search answers as you type, filling the street, city, state and ZIP. The pin and the fence are on a map, with no extra app or key to buy.

Site, job and client together

A job is created from inside its client, already with its job site, so a punch at the site knows the job and the client it belongs to.

Inside: the right job, automatically

Nobody picks the job from a list in the morning. The location at the punch decides, and the hours show up on that job's cost and timesheet.

Outside: flagged, not rejected

A worker who punches from the supply store or the truck still has the hours recorded. The punch is marked as outside the fence so the office decides what it means. Prefer a hard rule? Switch on refusing punches outside the job site.

Fake GPS is checked by the server

A modified app or a mock location app is easy on Android. The fence and the mock-location signal are validated by the server, not trusted from the phone.

Sites without a job

The warehouse, the yard and the office can be job sites too, so the crew can clock in there without inventing a job.

Geofence without tracking

Many geofence time clocks watch the phone all day and punch automatically when it crosses a line. BuildMore does not. The worker decides when to punch, and the location is read at that moment only. You get the answer you need, which site and was the person there, without a record of where your crew drives after work.

That matters for trust, and in some states it matters for the law on employee monitoring. It is also kinder to the phone's battery.

Frequently asked questions

What is a geofence time clock?

A time clock that compares the location of each punch with a virtual boundary drawn around the job site. In BuildMore the boundary is a circle around the site's address on the map, and every punch is checked against it when it is made.

What happens when someone clocks in outside the fence?

By default the punch is recorded with its time and how far outside it was, and flagged. The hours are not lost, and the office sees it and decides. If you prefer, a company setting refuses punches outside the job site instead.

Can workers fake their GPS location?

They can try. Mock location is easy on Android, so the server checks the signal itself instead of trusting the phone, and the punch carries what was detected.

Does the crew have to choose the job every morning?

No. The punch is matched to the nearest job site, and the hours go to that site's job.

How big should the fence be?

Big enough to cover the lot and where the crew parks. The radius is set in meters, 150 by default, from 25 (below that no phone GPS can tell reliably) up to 5,000. On a house, 50 to 100 meters is common. You can change it at any time.

Put it in front of a crew on Monday

30 days free, no card. Unlimited crew on every plan.